ThermaData Logger

Quantity:

Buy in bulk and save

ENQUIRY

THERMADATA LOGGER

• Blind recording thermometer & data - logger
• Visual display shows if limits are exceeded

The ThermaData data logger Mk1 is a cost effective, self-contained temperature data-logger
or blind recording thermometer that is designed to record the temperature of the surrounding
environment. The ThermaData data logger is housed in a water-resistant polyethylene case and
incorporates two LED status indicators.

The ThermaData logger software allows the user to programme the logging sample/interval rate
(1 to 255 minutes), the real-time clock, °C/°F, delayed start (maximum 23 hours, 59 minutes)
or push-button start and a 12-character user ID. The software also incorporates a password
protected calibration adjustment feature that allows the user to check the calibration of
loggers and make minor adjustments 0.5 °C (±3 °C)..

By selecting continuous logging in the software options, it is possible to start the ThermaData
logger only once and never have to reset its parameters again, even if downloaded regularly.
Unlike most low cost loggers, the ThermaData logger will continue recording during and after
downloading the data.

The user can also set within the software, high and low alarm values for a specific application.
A button push will allow a simple visual inspection of the unit to show if either of these limits
has been exceeded. An illuminated red LED will warn the user that the alarm limits have been exceeded
(reject) or an illuminated green LED will advise the user that the alarm limits have not been exceeded
(accept)

ThermaData PC software

The ThermaData logger is connected to a PC via a serial RS232 lead. By clicking on the relevant icon
the data can be downloaded and displayed either as a graph, table or summary. The information can then
be analysed by zooming in, storing to disc or exporting to other software packages.

Colour-coded data loggers

The ThermaData loggers are available in a variety of coloured cases; blue, white, yellow, green, red,
brown and black. The colour-coded cases help to prevent cross-contamination by allowing the user to
allocate a colour to a specific product or application. For example, in the food industry, green may
be used for salads, blue for fish and red for raw meats etc.
 
Other applications include different coloured loggers for easy identification in, eg, the building and
construction industry where loggers can often blend in with the environment. *N.B. this datalogger
requires purchase of lead & software.