Reference Thermapen

Quantity:

Buy in bulk and save

ENQUIRY

REFERENCE THERMAPEN

• 5-point UKAS Certificate included
• Ideal for calibration comparison checks
• 0.01 °C resolution, high accuracy thermometer

The Reference Thermapen thermometer is a high accuracy PT100 instrument that is
supplied with a 5-point UKAS Certificate of Calibration. Each certificate indicates
deviations from standards at various check points: -18, 0, 40, 70 and 100 °C. Special
ranges may be certified by arrangement with the ETI UKAS calibration laboratory.

The Reference Thermapen thermometer is ideal for comparison checking the calibration
and accuracy of other thermometers and probes, when used in conjunction with a stable
temperature heat or chill source. The instruments measure temperature over the range
of -69.99 to 199.99 °C with a resolution of 0.01 °C and an accuracy of ±0.07 °C.
 
The thermometer will power off automatically after ten minutes, maximising battery life.
This feature can be disabled if not required. Both low battery (icon) and open circuit
indication are displayed, when applicable. Each Reference Thermapen is powered by two
lithium coin cell batteries with a minimum life expectancy of 1000 hours.

The Reference Thermapen incorporates a stainless steel, liquid/penetration
probe Ø3.3 x 108 mm, that conveniently folds back through 180 degrees into
the side of the instrument when not in use.