DT-2269 STROBOSCOPE, RS-232 + push button adjustment

Brand:A.O.I.P

SKU:DT-2269

DIGITAL STROBOSCOPE,
RS-232 + push button adj.
Model : DT-2269 (AC 110V)
Model : DT-2269 (AC 220V or 230V)
* Range: 5 to 12,500 RPM.
* RPM setting by push button.
* External trigger signal input for simultaneous testing and measurement.
* Xenon flash tube, Display : 14 mm red LED.
* RS-232 computer interface.
* Optional, RS232 interface cable UPCB-02, USB interface cable USB-01.
* Optional software, SW-U801-WIN.

Specification
Features
Accessories

Display	14 mm ( 0.56" ) LED, 6 digits.
Set up unit	Flash rate - RPM/FPM, Hz * FPM - flash per minute.
Flash rate set up range	RPM: 5 to 12,500 RPM. Hz: 0.083 to 175 Hz.
Resolution ( internal trigger )	RPM/ FPM: 0.1 RPM 5 to 999.9 RPM, 1 RPM 1,000 to 9,999 RPM, 10 RPM 10,000 to 12,500 RPM. Hz:0.001 Hz < 10 Hz, 0.01 Hz 10 Hz - 99.99 Hz, 0.1 Hz 100 - 208 Hz.
Accuracy	± ( 0.15 % + 0.2 RPM ) rdg. < 1,000 RPM. ± ( 0.5 % + 1 RPM ) rdg. 1,000 to 3,300 RPM. ± 1 % FS. 3,301, to 12,500 RPM. rdg : reading, FS : full scale
Switch Select Function	RPM, Hz Fine adjust, Coarse adjust, Multiply by 2, Divide by 2, Fast finder, Memory recall.
Memory	Can memorize 10 sets of measuring data.
Set up stability	1 digit within 10 minute.
Data output	RS 232 computer interface.
Operating temp.	0 to 50 ℃ (32 to 122 ℉).
Operating humidity	Less than 80% R.H.
External trigger	Input signal : 5V to 30 V rms. 5 to 10,500 RPM. 0.083 to 175 Hz.
Power supply	AC 110V 10%, 50/60 Hz. or AC 220V 10%, 50/60 Hz. or AC 230V 10%, 50/60 Hz.
Circuit	This stroboscope/tachometer employs an custom one-chip of microcomputer LSI circuit & crystal control time base which results in extraordinary accuracy & high set up stability over a wide, dynamic range.
Power consumption	Less than 30 Watt.
Dimension	21 x 12 x 12 cm ( 8.3 x 4.8 x 4.8 inch ).
Weight	1Kg/2.2 LB.
Housing case	Compact and impact plastic injection case with plastic mirror type reflector.
Calibration	Crystal time base and microprocessor circuit, not necessary take any external calibration procedure if the stroboscope working properly.
Accessories included	Operation manual........1 PC. Power cord................. 1 PC
Optional Accessories	* RS232 cable.........UPCB-02. * USB cable............ USB-01. * Data Acquisition software ...........................SW-U801-WIN.